| XU08012 INA Slewing Ring Bearings | row type & fill slot:Single Row Non-Fill; cage material:Nylon; inner ring width:2.4375 in; closure type:Tri-Ply Seals; precision rating:Not Rated; bore size:2.7559 in; internal clearance:C0; application:Agriculture Bearing; series:200; outer ring width:1.5625 in; bore type:Round; D:4.9213 in; static load capacity:9800 lbs; dynamic load capacity:16000 lbs; B:2.4375 in; maximum rpm:500 rpm; finish/coating:Uncoated; |
| MTE-730T Kaydon Slewing Ring Bearings | housing material:Cast Iron; bore type:Round; overall height:4.9210 in; radial static load capacity:6610 lbf; seal type:Contact/Lip; B:2-5/8 in; replacement bearing:KH211-35; d:2.1875 in; mounting:Tapped Base; duty type:Normal Duty; base width:2.362 in; series:KHSHE200; radial dynamic load capacity:9700 lbf; bolt size:M16; lubrication type:Lubrication Fitting; overall length:5.9060 in; manufacturer product page:Click here; |
| 16366001 Kaydon Slewing Ring Bearings | seal type:Contact with Slinger; B:40.2 mm; locking device:Accu-Loc; base to bore centerline:1.4370 in; duty type:Normal Duty; bore type:Round; replacement bearing:UE205; overall length:76.2 mm; radial static load capacity:800 kgf; housing material:Cast Iron - Nickel P; lubrication type:Lubrication Fitting; mounting:Tapped Base; series:UETB200NP; d:25 mm; bolt size:3/8-16; D:50.8 mm; overall height:71.4 mm; |
| 16294001 Kaydon Slewing Ring Bearings | replacement bearing:MUC206-18; series:MUCFCS200TC; duty type:Standard Duty; locking device:Set Screw; unit standoff:1.268 in; d:1.1250 in; bolt circle diameter:3.6250 in; pilot diameter:3 in; radial static load capacity:2030 lbf; mounting type:Four-Bolt Piloted; bore type:Round; B:4.3750 in; radial dynamic load capacity:3750 lbf; lubrication type:Lubrication Fitting; housing material:Cast Iron - Teflon P; |
| MTE-87 Kaydon Slewing Ring Bearings | locking device:Concentric Collar; overall length:6.2500 in; radial dynamic load capacity:4368 lb; expansion type:Non-Expansion Bearin; standards met:UL, AFBMA, AGMA, ASM; finish/coating:Black Oxide; mounting:Two-Bolt Base; D:4-1/4 to 5 in; duty type:Medium Duty; d:1.0000 in; seal type:Contact/Lip; lubrication type:Lubrication Fitting; bore type:Round; housing material:Cast Iron; base width:1-3/4 in; |
| MTO-415T Kaydon Slewing Ring Bearings | manufacturer product page:Click here; drive square:0.7500 in; shaft ext clearance:4.7340 in; material:Hardened Alloy Steel; D:6.7500 in; for use with:AN-24, BH-24; shaft ext length:3.1250 in; |
| 92-20 1091/1-37272 IMO Slewing Ring Bearings | Limiting speed:1100 r/min; Reference speed:800 r/min; Da max.:650 mm; Basic static load rating C0:1930 kN; D1 ≈:632 mm; D:680 mm; Minimum load factor A:19; ra max.:1 mm; d:630 mm; r1,2 min.:1.1 mm; da min.:660 mm; Fatigue load limit Pu:28 kN; Mass bearing (including seat washer where applicable):12.5 kg; H:38 mm; Basic dynamic load rating C:221 kN; d1 ≈:678 mm; |
| MTE-47 Kaydon Slewing Ring Bearings | Fatigue Load Rating (kN):1.08; Grease Limiting Speed (r/min):11000; B:13mm; Preload:Medium; SKU:71817cdgb/p4-skf; Oil Limiting Speed (r/min):17000; Cage Type:Plastic; Clearance:Standard; Weight:0.27 KGS; Seals or Shields:Open Type; Dynamic Load Rating (kN):21.6; D:110mm; Static Load Rating (kN):25.5; Availability:In Stock; d:85mm; |