| 121.45.6000.990.41.1502 Standard 5 Slewing Ring Bearings | Center Guidance:Fixed Inner Ring Rib; Static Load Rating:63,100 N; D:80 mm; ra (max):1.5 mm; Roller Profile:Asymmetric; B:21 mm; Axial Load Factor Y1:2.03; Axial Load Factor Y0:1.99; Dynamic Load Rating:89,000 N; Fillet Radius/Chamfer:1.5 mm; d:35 mm; Retainer Material:Machined Brass; da (min):44 mm; Da (max):71 mm; Nr. of Holes:4; Limiting Speed - Oil:11,200 rpm; Limiting Speed - Grease:9,000 rpm; |
| 1 213 Rollix Slewing Ring Bearings | Bore Diameter (mm):38,1; Bearing number:3490/3420; C:23,812 mm; B:29,771 mm; Width (mm):29,37; T:29,37 mm; Outer Diameter (mm):79,375; D:79,375 mm; d:38,1 mm; a:8,6 mm; Size (mm):38.1x79.375x29.37; |
| 29 0641 01 Rollix Slewing Ring Bearings | Designation SX:CX136; Designation SKF:VKBA 3455; Designation Ruville:5401; Designation FAG:713610020; Bearing number:R157.22; |
| 191.50.4500.990.41.1502 Standard 5 Slewing Ring Bearings | Bearing number:AB12205; Bore Diameter (mm):15; Outer Diameter (mm):45; D:45 mm; d:15 mm; Width (mm):13; Size (mm):15x45x13; |
| 192.50.4000.990.41.1502 Standard 5 Slewing Ring Bearings | Ma:9 Nm / Tightening to; e:0,22; Size (mm):135x225x56; C:56 mm; d:135 mm; Cur:46000 N / Fatigue li; Cr:405000 N / Dynamic l; Fa max:13800 N / Permissibl; nG:1200 1/min / Limitin; Y0:3; rmin:2,1 mm; Y1:3,07; Width (mm):56; C0r:620000 N / Static lo; Bore Diameter (mm):135; D:225 mm; Bearing number:230SM135-MA; Mi:35 Nm / Tightening t; m:13 kg / Weight; B:100 mm; |
| 192.40.3150.990.41.1502 Standard 5 Slewing Ring Bearings | d:300 mm; C:90 mm; Outer Diameter (mm):420; Width (mm):90; Size (mm):300x420x90; Bore Diameter (mm):300; D:420 mm; B:90 mm; Bearing number:23960W33; |
| 7 1830 04 Rollix Slewing Ring Bearings | Coefficient of friction µ min.:0.03; Basic dynamic load rating - radial direction C:950 kN; Specific static load factor K0:250 N/mm²; Specific dynamic load factor K:80 N/mm²; Basic dynamic load rating (C):950 kN; ground type:Ground; Manufacturer Name:SKF; c1 min.:0.2 mm; Bore Diameter (mm):120; Factor depending on material and bearing type KM:480; D:125 mm; Minimum Buy Quantity:N/A; |
| 33 0641 01 Rollix Slewing Ring Bearings | Da(max):214; Bearing number:NN3030; r min.:2,1 mm; Basic static load rating (C0):587 kN; D:225 mm; B:56 mm; C:56 mm; C0r:587; ra max.:2 mm; Size (mm):150x225x56; da min.:161 mm; da(max):-; d:150 mm; Da(min):208; (Refer.)Mass(kg):7.74; Da max.:214 mm; Oil lub.:3000; Fw:-; Bore Diameter (mm):150; Weight:7,74 Kg; |