| REXROTH 4WE6D7X/OFHG24N9K4/B10 Valves | B1:176.174 mm; Mass adapter sleeve assembly:29.5 kg; Hydraulic nut:HMVC 64E; Sleeve:S 3064x11.15/16; B5:51.841 mm; d:320 mm; d3 max.:381.127 mm; Threads per inch:6; d1:303.212 mm; B:42.316 mm; |
| REXROTH 4WE6F7X/HG24N9K4/V Valves | s max.:2.1 mm; B:39 mm; da min.:92 mm; Angle ring:HJ 316 EC; da max.:98 mm; d1 ≈:110 mm; Basic static load rating C0:290 kN; Da max.:157.8 mm; D:170 mm; ra max.:2 mm; |
| REXROTH DBE30-3X/50YG24N9K4 Valves | Mass inner ring:0.033 kg; r, r1,2 min.:0.3 mm; d:25 mm; F:30 mm; B:20 mm; |
| REXROTH DBW10B2-5X/200-6EG24N9K4/V Valves | Grease Speed Rating n1:2600 rpm; Accessories:Two Shields; Oil Speed Rating n2:3600 rpm; D:150.0000 mm; d:85.000 mm; Fillet Radius ra:2.00 mm; B:49.20 mm; Sealed Speed Rating n3:2600 rpm; Basic Dynamic Radial Load Rating C:124000 N; Basic Static Radial Load Rating Co:110000 N; |
| REXROTH ZDR6DP1-4X/150Y Valves | r1,2 min.:0.2 mm; Dw:2.5 mm; Mass needle roller:0.61 g; r2 max.:0.8 mm; r1 max.:0.6 mm; Lw:15.8 mm; |
| REXROTH 4WE6H7X/HG24N9K4/B10 Valves | d1:38.1 mm; B4:11 mm; Lock nut:KM 9; d:45 mm; Mass adapter sleeve assembly:0.31 kg; Locking device:MB 9; B:10 mm; d3:65 mm; G:M 45x1.5; B1:50 mm; |
| REXROTH ZDR6DP2-4X/150Y Valves | Cap bolt recommended tightening torque:271.2 N·m; N1:34.925 mm; J1:114.3 mm; Housing:SAW 538; S:4.763 mm; H1:200.025 mm; ba:92.869 mm; Stabilizing ring:SR-38-32; Cap bolt:4 x 7/8-9 UNC; Ca:129.819 mm; |
| REXROTH 4WE10A3X/OFCW230N9K4 Valves | d1 ≈:153.45 mm; B2:20 mm; d:120 mm; B1:11 mm; r3,4 min.:2.1 mm; Mass angle ring:0.73 kg; |
| REXROTH 4WE 6 Q6X/EW230N9K4/V R901532458 Valves | B:30.429 mm; Lock washer:W 40; d3 max.:250.165 mm; Hydraulic nut:HMVC 40E; d:200 mm; Lock nut:AN 40; G:199.314 mm; Mass adapter sleeve assembly:16 kg; Threads per inch:8; B4:34.138 mm; |
| REXROTH 4WE6G7X/HG24N9K4/B10 Valves | Fatigue load limit Pu:88 kN; r1,2 min.:7 mm; Calculation factor Y:1.8; Da min.:184 mm; D:212.725 mm; Cb min.:12.5 mm; d1 ≈:158.1 mm; Calculation factor Y0:1; d:101.6 mm; r3,4 min.:3.3 mm; |