| AMI UC205-14 Insert Bearings Spherical OD | C:215 mm; Basic dynamic load rating C:8500 kN; ra max.:2 mm; M:10 mm; D:750 mm; rb max.:5 mm; r1 min.:2 mm; Lubricant:Maintenance free &nd; Sealing solution:-; dk:655 mm; |
| AMI 208CCB Mounted Units & Inserts | R1:79.375 mm; ba:53.975 mm; A2:190.5 mm; P180°:107 kN; P60°:249 kN; End plug (suffix Y):EPR 27; Initial grease fill:379.89 g; H:257.175 mm; PG:1/4 NPT; Eye bolt:2 x 3/8-16 UNC; |
| AMI UCFB206-20NPMZ20RF Mounted Units & Inserts | Basic static load rating C0:400 kN; dk:80 mm; w:70 mm; Mass rod end:7.1 kg; G:M 52x3; C1 max.:39 mm; d:60 mm; Material constant KM:330; h1:175 mm; Basic dynamic load rating C:245 kN; |
| AMI UC211-35 Insert Bearings Spherical OD | Associated spanner:TMFN 600-750; b:55 mm; Associated eyebolt for handling:M 12; G:Tr 750x7; Mass lock nut:102 kg; d1:820 mm; h:25 mm; d3:870 mm; d2:782 mm; B5:112 mm; |
| AMI UCFBL201-8MZ2B Flange Block Bearings | Pu:0.890 kN; dynamic Cr:12.660 kN; D:30 mm; Oil:9 400 min-1; static Cor:19.600 kN; d1:30 mm; d:17 mm; Grease:7 100 min-1; D1:18 mm; rs (min):0.3 mm; |
| AMI UCFB202-10TC Mounted Units & Inserts | Hydraulic nut:HMVC 36E; B1:127.711 mm; Sleeve:S 36x6.5/16; d1:160.338 mm; Lock washer:W 36; G:179.476 mm; d:180 mm; Mass adapter sleeve assembly:9.3 kg; B4:31.75 mm; Threads per inch:8; |
| AMI MUCNFL205-14CW Flange Block Bearings | D:9 mm; da max.:5.9 mm; Fatigue load limit Pu:0.004 kN; Basic dynamic load rating C:0.247 kN; Reference speed:130000 r/min; Calculation factor kr:0.02; Mass bearing:0.00061 kg; Da max.:8.2 mm; ra max.:0.15 mm; d1 ≈:6 mm; |
| AMI UKFT209+HS2309 Mounted Units & Inserts | Basic static load rating C0:57 kN; U:20 mm; Ew:47 mm; Fw:40 mm; Reference speed:10000 r/min; Fatigue load limit Pu:6.95 kN; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 40x47x4; Designation associated G design radial shaft seal with a low cross-sectional height:G 40x47x4; Mass needle roller and cage assembly:0.042 kg; Basic dynamic load rating C:31.4 kN; |
| AMI UEWTPL206CW Mounted Units & Inserts | d:75.000 mm; Oil Speed Rating n2:3600 rpm; Fillet Radius ra:2.00 mm; D:160.0000 mm; Grease Speed Rating n1:2600 rpm; Sealed Speed Rating n3:2600 rpm; B:71.40 mm; Basic Dynamic Radial Load Rating C:187000 N; Basic Static Radial Load Rating Co:208000 N; Accessories:Shield & Seal; |
| AMI UCWTPL204-12MZ20RFCW Mounted Units & Inserts | Limiting speed:850 r/min; d1 ≈:767 mm; Fatigue load limit Pu:365 kN; Basic dynamic load rating C:1940 kN; d:710 mm; Da max.:855 mm; da max.:825 mm; s max.:7.5 mm; Basic static load rating C0:5000 kN; Reference speed:630 r/min; |