| AMI MUCNTPL208-24CEW Mounted Units & Inserts | P180°:19.1 kN; P120°:17.8 kN; Stabilizing ring:SR-13-0; End plug (suffix Y):EPR 6; Da:120 mm; da:57.15 mm; J max.:241.3 mm; Initial grease fill:53.865 g; Pa:6.09 kN; R2:15.875 mm; |
| AMI KHFT209-28 Flange Block Bearings | B1:4 mm; Mass angle ring:0.017 kg; r3,4 min.:0.6 mm; d:20 mm; d1 ≈:31.25 mm; B2:6.5 mm; |
| AMI UEP212 Pillow Block Bearings | E:116.99 mm; s max.:4 mm; Fatigue load limit Pu:29 kN; Calculation factor Y:0.4; B:34 mm; Calculation factor kr:0.3; Basic dynamic load rating C:165 kN; d1 ≈:95 mm; Basic static load rating C0:228 kN; das:92 mm; |
| AMI MUCNTPL204W Take Up Unit Bearings | Reference speed:700 r/min; r3,4 min.:5 mm; Fatigue load limit Pu:900 kN; rb max.:4 mm; d:440 mm; r1,2 min.:6 mm; B:280 mm; da min.:466 mm; F:511 mm; Limiting speed:900 r/min; |
| AMI MUCPA201-8NP Pillow Block Bearings | P55°:415 kN; Tightening torque for grub screws:8 N·m; Pa:25 kN; Fatigue load limit Pu:26.5 kN; Tightening torque for attachment bolts:385 N·m; ba min.:38 mm; Bearing mean diameter dm:102.5 mm; da:75 mm; N4 max.:8 mm; A3:80 mm; |
| AMI UCPPWS206-19MZ2 Pillow Block Bearings | Oil Speed Rating Open/Shielded n2:2600 rpm; Grease Speed Rating Open/Shielded n1:2100 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:157000 N; Basic Static Radial Load Rating Co:190000 N; d:140.000 mm; B:36.00 mm; D:220.0000 mm; Accessories:Without Accessories; |
| AMI UEECH205-16TC Hanger Unit Bearings | Da:140 mm; Bearing:1216 K; J min.:244.475 mm; Housing:SAF 516; RG:3/8 NPT; Taconite seal:TER 44; H1:88.9 mm; H2:31.75 mm; Mass pillow block:16.4 kg; End plug (suffix Y):EPR 8; |
| AMI UCFB206-20NPMZ20RF Mounted Units & Inserts | Basic static load rating C0:400 kN; dk:80 mm; w:70 mm; Mass rod end:7.1 kg; G:M 52x3; C1 max.:39 mm; d:60 mm; Material constant KM:330; h1:175 mm; Basic dynamic load rating C:245 kN; |
| AMI UKFCSX17+H2317 Mounted Units & Inserts | d:19.05 mm; Housing:FYWK 504 Y; Mass bearing unit:0.3 kg; L:86 mm; Housing material:Composite for food a; N:12.3 mm; Recommended diameter for attachment bolts, inch G:0.375 in; B:31 mm; A1:15 mm; Limiting speed:5000 r/min; |
| AMI UP001 Pillow Block Bearings | Grease Speed Rating Open/Shielded n1:2800 rpm; Accessories:Two Seals; D:210.0000 mm; B:28.00 mm; d:150.000 mm; Basic Dynamic Radial Load Rating C:88400 N; Sealed Speed Rating n3:1800 rpm; Oil Speed Rating Open/Shielded n2:3400 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:93000 N; |