| AMI UCFB206-18 Flange Block Bearings | Oil Speed Rating n2:24000 rpm; D:28.0000 mm; B:14.00 mm; Basic Dynamic Radial Load Rating C:7930 N; Fillet Radius rb:0.10 mm; d:15.000 mm; Fillet Radius ra:0.30 mm; Grease Speed Rating n1:19000 rpm; Basic Static Radial Load Rating Co:5400 N; |
| AMI MUCF202NP Flange Block Bearings | Static moment stiffness:50 N·m/mrad; Frictional moment:0.16 N·m; Required attachment bolt size (DIN 912):M6; r1,2 min.:0.3 mm; Basic static load rating C0:30 kN; Basic dynamic load rating C:19.6 kN; Mass bearing:0.35 kg; Static axial stiffnes:400 N/µm; ra max.:0.3 mm; da min.:16 mm; |
| AMI UGFL310 Flange Block Bearings | Static (Cor):7725 ; Pu:551.730 kg; Weight:375 ; D:720 mm; d:470 mm; B:270 mm; B1:167 mm; Bearing designation:PLC 512-46 ; Dynamic (Cr):3712.8 kN; |
| AMI KHPFT202-10 Flange Block Bearings | Initial grease fill:181.44 g; Pa:13.8 kN; Housing:SAFS 520; H1:114.3 mm; Ca:55.804 mm; Cap bolt, SAE grade:8; Adapter sleeve assembly:SNW 20x3.7/16; P120°:52.5 kN; h:42.069 mm; Max. speed for PosiTrac Plus seal:1650 r/min; |
| AMI BPW207 Pillow Block Bearings | Cap bolt recommended tightening torque:298.3 N·m; A2:190.5 mm; Eye bolt:2 x 3/8-16 UNC; Bearing limiting speed:3400 r/min; da:127 mm; Pa:22.2 kN; N1:22.225 mm; A1:120.65 mm; Appropriate attachment bolt size G:0.75 in; Ca:72.619 mm; |
| AMI KH201-8 Insert Bearings Spherical OD | C:53 mm; ra max.:2.5 mm; Da min.:71 mm; T:62 mm; a:33 mm; Db min.:91 mm; Basic dynamic load rating C:189 kN; da max.:54 mm; d1 ≈:73.4 mm; Ca min.:3 mm; |
| AMI UEHPL207-20MZ20W Hanger Unit Bearings | P120°:66.7 kN; Taconite seal:TER 118; PG:1/4 NPT; H2:52.388 mm; Housing:SAFS 026 KA; H1:125.425 mm; Pa:20.2 kN; P150°:59.6 kN; Stabilizing ring:2 x 38151-26; J1:69.85 mm; |
| AMI UCFL205-16TC Mounted Units & Inserts | Grease Speed Rating Open/Shielded n1:1200 rpm; Basic Static Radial Load Rating Co:500000 N; Fillet Radius ra:3.00 mm; B:74.00 mm; Oil Speed Rating Open/Shielded n2:1500 rpm; Basic Dynamic Radial Load Rating C:358000 N; d:300.000 mm; Accessories:Two Seals & Snap-Rin; Sealed Speed Rating n3:780 rpm; D:460.0000 mm; |
| AMI UCFBL201-8MZ2B Flange Block Bearings | Pu:0.890 kN; dynamic Cr:12.660 kN; D:30 mm; Oil:9 400 min-1; static Cor:19.600 kN; d1:30 mm; d:17 mm; Grease:7 100 min-1; D1:18 mm; rs (min):0.3 mm; |
| AMI UGCJO315-48 Flange Block Bearings | Bearing designation:6312 ; Oil:6 300 min-1; Dynamic (Cr):81.500 kN; Weight:1.72 kg; rs:2.1 mm; Grease:5 300 min-1; da:72 min; Static (Cor):52.100 kN; d:60 mm; D:130 mm; |