| KAWASAKI 705-95-07080 HM Series Pump | Rating life coefficient, A2:1.4; Dynamic load, C:119 kN; Nlim (grease):3,200 rpm; Nlim (oil):4,300 rpm; Product Group:B04334; Characteristic cage frequency, FTF:0.44 Hz; Max operating temperature, Tmax:120 °C; e:0.4; Y0:0.82; Weight / Kilogram:0; |
| KAWASAKI 705-95-80030 HM Series Pump | T max.:200 °C; d1:32.4 mm; Designation of bearing:EX203G2T20; Designation of housing:P204N-; A:38 mm; Weight:0.83 kg; Designation of closed end cover:SCCE204; H1:15 mm; A1:22 mm; Z:63.4 mm; |
| KAWASAKI 705-95-07020 HM Series Pump | Mass:0.02 kg; B:18 mm; da min:22 mm; rs min:0.3 mm; ras max:0.3 mm; Brand:NTN; d:20 mm; Lubrication hole on inner ring:Oui/Yes; Precision class:P0; F:25 mm; |
| KAWASAKI 705-95-07091 HM Series Pump | Recommended tightening torque for set screw:11.5 Nm; r:1.1; d1:51.1 mm; B:25.4 mm; C:17 mm; Weight:0.5 kg; S:9.5 mm; C1:5.7 mm; T max.:200 °C; T min.:-20 °C; |
| KAWASAKI 705-95-07101 HM Series Pump | Characteristic outer ring frequency, BPF0:3.09 Hz; Da max:177 mm; Max operating temperature, Tmax:110 °C; d:90 mm; f0:13.3; da max:118 mm; ra max:2.5 mm; Characteristic rolling element frequency, BSF:4.18 Hz; rs min:3 mm; da min:103 mm; |
| KAWASAKI 705-95-07090 HM Series Pump | A:36 mm; T min.:-20 °C; A2:44.5 mm; Weight:1.54 kg; Designation of closed end cover:SCC207; Z:50.7 mm; L:118 mm; B:32 mm; T max.:100 °C; C:25.7 kN; |
| KAWASAKI 705-95-05100 HM Series Pump | End Cap Groove:No; Max Bearing Speed:7500 rpm; Grease Type:Unirex N2; Housing Coating:Powder Coat; Ball Material:Steel; Shaft Attachment (2):Set Screw; Bearing Series:204 Series; Self Aligning:Self Centering; Housing Type:Narrow Slot Take-Up; Seal Type:Single Lip; |
| KAWASAKI 705-95-07100 HM Series Pump | Weight:1.18 kg; C:19.5 kN; B1:35.7 mm; L:108 mm; A2:46.7 mm; d1:44.1 mm; s1:27.8 mm; d:30 mm; Recommended tightening torque for set screw:11.5 Nm; B:23.8 mm; |
| KAWASAKI 705-95-05130 HM Series Pump | T max.:200 °C; C:62 kN; N:23mm; G:M6x1; S:24.6 mm; Designation of housing:F310-; L:175 mm; A1:20 mm; J:132 mm; e:28 mm; |
| KAWASAKI 705-95-07121 HM Series Pump | Recommended tightening torque for set screw:3.7 Nm; s1:15.5 mm; G:R1/8"; Weight:0.7 kg; N:11,5mm; Designation of bearing:UC202-10G2L3; T min.:-20 °C; C0:6.65 kN; d:15.88 mm; T max.:100 °C; |