| KAWASAKI 705-95-05130 HM Series Pump | T max.:200 °C; C:62 kN; N:23mm; G:M6x1; S:24.6 mm; Designation of housing:F310-; L:175 mm; A1:20 mm; J:132 mm; e:28 mm; |
| KAWASAKI 705-95-05100 HM Series Pump | End Cap Groove:No; Max Bearing Speed:7500 rpm; Grease Type:Unirex N2; Housing Coating:Powder Coat; Ball Material:Steel; Shaft Attachment (2):Set Screw; Bearing Series:204 Series; Self Aligning:Self Centering; Housing Type:Narrow Slot Take-Up; Seal Type:Single Lip; |
| KAWASAKI 705-95-07040 HM Series Pump | G:R1/8"; T max.:100 °C; d:25 mm; A:36 mm; Dz:60 mm; Recommended tightening torque for set screw:5.5 Nm; H:36.5 mm; Designation of open end cover:SCO205-25; A1:21 mm; Z:47.3 mm; |
| KAWASAKI 705-95-03010 HM Series Pump | s1:30.5 mm; L:130 mm; d:12 mm; H1:14.5 mm; C0:6.65 kN; S:17 mm; Designation of bearing:EX201G2L3; Z:15.3 mm; B:34 mm; C:12.8 kN; |
| KAWASAKI 705-95-05140 HM Series Pump | Designation of bearing:ES210G2; H2:165 mm; B1:43.7 mm; d:50 mm; H1:22 mm; L1:65 mm; d1:67.2 mm; N1:25 mm; s1:33.4 mm; N:20mm; |
| KAWASAKI 705-95-07080 HM Series Pump | Rating life coefficient, A2:1.4; Dynamic load, C:119 kN; Nlim (grease):3,200 rpm; Nlim (oil):4,300 rpm; Product Group:B04334; Characteristic cage frequency, FTF:0.44 Hz; Max operating temperature, Tmax:120 °C; e:0.4; Y0:0.82; Weight / Kilogram:0; |
| KAWASAKI 705-95-07090 HM Series Pump | A:36 mm; T min.:-20 °C; A2:44.5 mm; Weight:1.54 kg; Designation of closed end cover:SCC207; Z:50.7 mm; L:118 mm; B:32 mm; T max.:100 °C; C:25.7 kN; |
| KAWASAKI 705-95-05050 HM Series Pump | T min.:-20 °C; H2:126 mm; H1:25 mm; A:60 mm; d:55.56 mm; s1:27.8 mm; J:100 mm; Designation of bearing:UC211-35G2L3; C0:29.2 kN; Designation of housing:PG211-; |
| KAWASAKI 705-95-07101 HM Series Pump | Characteristic outer ring frequency, BPF0:3.09 Hz; Da max:177 mm; Max operating temperature, Tmax:110 °C; d:90 mm; f0:13.3; da max:118 mm; ra max:2.5 mm; Characteristic rolling element frequency, BSF:4.18 Hz; rs min:3 mm; da min:103 mm; |
| KAWASAKI 705-94-07030 HM Series Pump | Designation of closed end cover:SCC208; L1:52 mm; N:17mm; Weight:2.23 kg; Z:69 mm; G:M6x1; T min.:-20 °C; C0:18.2 kN; Recommended tightening torque for set screw:8 Nm; B:49.2 mm; |