| KAWASAKI 705-95-80030 HM Series Pump | T max.:200 °C; d1:32.4 mm; Designation of bearing:EX203G2T20; Designation of housing:P204N-; A:38 mm; Weight:0.83 kg; Designation of closed end cover:SCCE204; H1:15 mm; A1:22 mm; Z:63.4 mm; |
| KAWASAKI 44083-61000 HM Series Pump | B:49.2 mm; s1:24.6 mm; A1:14 mm; L:100 mm; G:M6x1; T min.:-20 °C; e:21 mm; d:38.1 mm; Designation of bearing:UC208-24G2T20; N:16mm; |
| KAWASAKI 705-95-07101 HM Series Pump | Characteristic outer ring frequency, BPF0:3.09 Hz; Da max:177 mm; Max operating temperature, Tmax:110 °C; d:90 mm; f0:13.3; da max:118 mm; ra max:2.5 mm; Characteristic rolling element frequency, BSF:4.18 Hz; rs min:3 mm; da min:103 mm; |
| KAWASAKI 705-95-07080 HM Series Pump | Rating life coefficient, A2:1.4; Dynamic load, C:119 kN; Nlim (grease):3,200 rpm; Nlim (oil):4,300 rpm; Product Group:B04334; Characteristic cage frequency, FTF:0.44 Hz; Max operating temperature, Tmax:120 °C; e:0.4; Y0:0.82; Weight / Kilogram:0; |
| KAWASAKI 705-95-01020 HM Series Pump | J:184 mm; H3:160; N:18mm; G:R1/8"; Weight:5.96 kg; L:220 mm; d:69.85 mm; Adapter sleeve reference:H2316-44; e:-2 mm; A2:37 mm; |
| KAWASAKI 705-95-07121 HM Series Pump | Recommended tightening torque for set screw:3.7 Nm; s1:15.5 mm; G:R1/8"; Weight:0.7 kg; N:11,5mm; Designation of bearing:UC202-10G2L3; T min.:-20 °C; C0:6.65 kN; d:15.88 mm; T max.:100 °C; |
| KAWASAKI 705-95-07100 HM Series Pump | Weight:1.18 kg; C:19.5 kN; B1:35.7 mm; L:108 mm; A2:46.7 mm; d1:44.1 mm; s1:27.8 mm; d:30 mm; Recommended tightening torque for set screw:11.5 Nm; B:23.8 mm; |
| KAWASAKI 705-95-07030 HM Series Pump | A1:9.5 mm; s1:34.1 mm; H3:80; C:19.5 kN; G:M6x1; B1:48.3 mm; J:100 mm; T min.:-40 °C; Weight:1.13 kg; Designation of housing:FCE206-; |
| KAWASAKI 705-95-01010 HM Series Pump | N:12mm; J:98 mm; d:22.22 mm; L1:65 mm; J1:51 mm; C0:7.88 kN; T min.:-20 °C; e:16 mm; T max.:100 °C; B:34 mm; |
| KAWASAKI 705-95-05100 HM Series Pump | End Cap Groove:No; Max Bearing Speed:7500 rpm; Grease Type:Unirex N2; Housing Coating:Powder Coat; Ball Material:Steel; Shaft Attachment (2):Set Screw; Bearing Series:204 Series; Self Aligning:Self Centering; Housing Type:Narrow Slot Take-Up; Seal Type:Single Lip; |