No. | Brand | a | B | U | G | h | D | d | K |
705-52-42090 | KAWASAKI | - | 1-15/16 in | - | - | - | 3-1/4 in | 1.4375 in | - |
705-52-32001 | KAWASAKI | - | - | - | - | - | 3/4 in | 1/2 in | - |
07441-67502 | KAWASAKI | - | 20mm | - | - | - | 200mm | 160mm | - |
705-56-44090 | KAWASAKI | - | - | - | - | - | 2.5313 in | 0.7500 in | - |
705-52-42100 | KAWASAKI | - | 1.0000 in | - | - | - | 62 mm | - | - |
07445-66400 | KAWASAKI | - | 161 mm | - | - | - | 130 mm | 35 mm | - |
705-12-44040 | KAWASAKI | - | 1-11/16 in | - | - | - | 85 mm | 1.6875 in | - |
705-22-36080 | KAWASAKI | - | - | - | - | - | - | - | - |
705-52-30290 | KAWASAKI | - | - | - | - | - | 6.04 Inch | 153.416 Millimeter | 5.118 Inch | 130 Millimeter | - |
705-52-31010 | KAWASAKI | - | 17mm | - | - | - | - | 25mm | - |
705-52-22000 | KAWASAKI | - | 5.3750 in | - | - | - | - | - | - |
07445-66300 | KAWASAKI | - | 70mm | - | - | - | 210mm | 120mm | - |
705-22-38050 | KAWASAKI | - | 160 mm | - | - | - | 125 mm | 45 mm | - |
705-52-30050 | KAWASAKI | - | 21 mm | - | - | - | - | - | - |
705-52-20090 | KAWASAKI | - | 8mm | - | - | - | 28mm | 12mm | - |
07443-66503 | KAWASAKI | - | 28mm | - | - | - | 110mm | 60mm | - |
705-11-29010 | KAWASAKI | - | - | - | - | - | 5.3750 in | 2.5625 in | - |
07448-66107 | KAWASAKI | - | - | - | - | - | 1/4 in | 3/16 in | - |
705-11-38110 | KAWASAKI | 17.055 mm | 23.02 mm | - | - | - | 76.2 mm | - | - |
07435-67101 | KAWASAKI | - | - | - | - | - | 1/2 in | 3/8 in | - |
705-52-30150 | KAWASAKI | - | 1-47/64 in | - | - | - | - | - | - |
705-12-38010 | KAWASAKI | - | - | - | - | - | - | 0.1900 in | - |
KAWASAKI 705-52-30051 HD Series Pump | radial dynamic load capacity:2150 lbf; mounting type:Two-Bolt Flange; B:6.4375 in; duty type:Standard Duty; housing material:PBT Thermoplastic; length through bore:0.866 in; lubrication type:Lubrication Fitting; D:5.1250 in; end type:Open; seal type:Contact with Flinger; |
KAWASAKI 705-56-44090 HD Series Pump | replacement bearing:FHR204-12; d:0.7500 in; duty type:Normal Duty; locking device:Eccentric Collar; inner ring width:1.2200 in; D:2.5313 in; housing type:Cylindrical Cartridg; bearing material:Rubber; manufacturer upc number:8865590320776; seal type:RST; |
KAWASAKI 705-52-30040 HD Series Pump | B:21 mm; cage material:Steel; radial static load capacity:5850 lb; finish/coating:Uncoated; radial dynamic load capacity:12000 lb; closure type:Open; precision rating:Not Rated; series:7400; D:80 mm; outer ring width:21 mm; |
KAWASAKI 07448-66107 HD Series Pump | standards met:RoHS, ASTM B438 Grad; sleeve bearing type:Plain Sleeve; material specification:SAE 841; operating temperature range:+10 to +22; maximum v value:1200 fp/min; maximum p value:2000 psi; overall length:1/2 in; D:1/4 in; d:3/16 in; bearing material:Bronze; |
KAWASAKI 705-22-36080 HD Series Pump | Pa:75.6 kN; A1:222.25 mm; Cap bolt recommended tightening torque:400 N·m; N1:41.275 mm; H1:241.3 mm; R2:46.831 mm; Initial grease fill:2749.95 g; Da:399.999 mm; H2:95.25 mm; RG:1 NPT; |
KAWASAKI 07443-67101 HD Series Pump | manufacturer upc number:087796292949; snap ring included:Without Snap Ring; precision rating:ABEC 1; D:180 mm; cage material:Steel; bore type:Round; d:120 mm; B:28 mm; closure type:Two Contact Seals; internal clearance:C0; |
KAWASAKI 07439-66103 HD Series Pump | duty type:Standard Duty; locking device:Set Screw; seal type:Contact Seal; series:SFT-C CR; B:4.3750 in; housing material:Stainless Steel; bore type:Round; bolt size:.5625 in; d:1.7500 in; D:5.8438 in; |
KAWASAKI 705-11-36010 HD Series Pump | radial static load capacity:9800 lb; seal type:Contact/Lip; overall length:10.5000 in; lubrication type:Lubrication Fitting; overall height:6.4375 in; expansion type:Non-Expansion Bearin; radial dynamic load capacity:15600 lb; operating temperature range:Maximum of +250; finish/coating:Uncoated; duty type:Normal Duty; |
KAWASAKI 705-22-38050 HD Series Pump | locking device:Set Screw; manufacturer upc number:4547359066128; B:160 mm; mounting type:Four-Bolt Flange; D:125 mm; bore type:Round; d:45 mm; |
KAWASAKI 705-12-44040 HD Series Pump | bore type:Round; finish/coating:Uncoated; B:1-11/16 in; d:1.6875 in; snap ring included:Without Snap Ring; inner ring width:1.6875 in; maximum rpm:2690 RPM; series:KR; D:85 mm; outer ring width:19 mm; |
KAWASAKI 705-52-31250 HD Series Pump Video