| Vickers V20-1P6P-1A20 Vane Pump | Characteristic inner ring frequency, BPFI:7.93 Hz; Dynamic load, C:21.1 kN; ra max:1 mm; f0:15.6; B:16 mm; Mass:0.27 kg; D:80 mm; da max:59.7 mm; Characteristic rolling element frequency, BSF:7.37 Hz; Nref:8,900 rpm; |
| Vickers V20201F11B11B11CC30L Vane Pump | d:15 mm; N1:16 mm; Recommended tightening torque for set screw:5.5 Nm; A:32 mm; T max.:200 °C; L2:10 mm; N:19mm; Weight:0.87 kg; L3:51 mm; s1:30.5 mm; |
| Vickers V20-1B9B-1C-11-EN-1000 Vane Pump | d1:27.2 mm; Designation of bearing:ES202G2T04; B:19.1 mm; Recommended tightening torque for set screw:5.5 Nm; A1:11 mm; T max.:100 °C; Designation of housing:F203N-; e:15 mm; T min.:-40 °C; Z:22 mm; |
| Vickers V20-1S12S-1A-11 Vane Pump | Characteristic outer ring frequency, BPF0:4.12 Hz; B:12 mm; D:47 mm; rs min:0.6 mm; Nlim (grease):15,000 rpm; f0:14.5; ra max:0.6 mm; Da max:43 mm; Min operating temperature, Tmin:-20 °C; Radial clearance class:C2; |
| Vickers V10-1P7P-1A20 Vane Pump | Static load, C0:86.7 kN; Radial clearance class:C3; rs min:2.1 mm; D1:149.7 mm; d1:100.3 mm; ra max:2 mm; Characteristic outer ring frequency, BPF0:3.09 Hz; Fatigue limit load, Cu:3.5 kN; Dynamic load, C:123 kN; Mass:3.7 kg; |
| Vickers V2020 1F13B6B 1AA 30 Vane Pump | G:M6x1; d:44.45 mm; e:22 mm; L1:90 mm; J1:72 mm; A:38 mm; T max.:200 °C; Designation of bearing:US209-28G2T20; Weight:1.87 kg; H:181 mm; |
| Vickers V20-1P7P-1A-11 Vane Pump | s1:53.2 mm; L:195 mm; B:61.8 mm; C:52.5 kN; H3:135; Designation of housing:FC212-; A4:36 mm; G:M6x1; C0:32.8 kN; T max.:100 °C; |
| Vickers V10-1P1P-1A20 Vane Pump | A5:20.5 mm; H:146 mm; B:32.5 mm; SW:4.76 mm; A2:38 mm; S:12 mm; Designation of bearing:ES211-35G2T20; Weight:3.61 kg; B1:48.4 mm; H2:102 mm; |
| Vickers V20-1S13S-6D-11L Vane Pump | Recommended tightening torque for set screw:27.1 Nm; d:55.56 mm; Designation of bearing:UC311-35G2L3; s1:33 mm; T min.:-20 °C; S:25 mm; C:71.5 kN; e:30 mm; T max.:100 °C; B:66 mm; |
| Vickers V20101F6B2B1AA12 Vane Pump | B:34.8 mm; G:M6x1; d1:37.4 mm; J:50 mm; H2:70 mm; A1:25 mm; Recommended tightening torque for set screw:3.7 Nm; S:17.4 mm; B1:44.3 mm; E:18 mm; |